When looking for the best systems alarms for homes in Barcelona, it is important that you know the steps to install the devices, not only to facilitate the process, but to oversee the work of the security company. This procedure warrants that you review your housing plans, sensors and detectors are located, in addition to the control panel is programmed.
So if you want to know what are the steps to install a basic alarm system in your house? You mention them below.
Review the plans of the property
The first step to install a complete security system in your home is to review the plans of the property, as this will provide information on the number of rooms, entrances (windows and doors) and stairs. All these factors will determine how the installation and which areas will have priority to offer complete security.
Therefore, verify the plans of your home or if you do not have them, creates a flat on your own where you reflexes all data previously mentioned. This will help security personnel to work more efficiently, focused on the benefits and shortcomings of your home, by way of locating all sensors, detectors and other elements of the system efficiently.
Locate detectors incidents
Know that all buildings, both commercial and domestic, need to place alarms that detect common incidents, whether a gas leak, and fire or excess carbon monoxide. Therefore, the second step is to determine where these devices will be placed to protect so efficient your family, emphasizing risk areas such as the kitchen, basement and areas where a fire there, since it is where they can arise counterproductive facts.
Therefore evaluated by the staff of the security company must be provided where the alarms home, taking into account the presence of artifacts emanating heat, fireplaces and kitchens. In this regard it is important that you protect each of the floors of your house and dispenses devices near bedrooms, so that your family are protected completely.
Install the control panel
The control panel is the brain of your alarm system, so the third step corresponds to the installation of this equipment, so that its location resulting functional and easily accessible to all family members. Therefore determines which wall can arrange it (preferably near the front door), so you have access to an outlet, and consultation on space with professionals.
The alarm systems for homes depend on this device, so make sure it is properly connected and battery backup available if the plug is disconnected or there is a power failure in your home.
Protect access with sensors
The next step you need to take, so that the installation of your basic alarm system to be effective, is to protect access with sensors. For this task you can select backup magnetic stripe devices and motion detectors, so that your home is protected both internally and externally, and complement them with surveillance cameras.
In this respect it is highly important that you have at your disposal the plan of your home (mentioned in the first step), so that it easier to realize with the security company the amount of available sensors.
However, if you do not have enough budget, you can determine the most susceptible access to intruders, so that the sensors are arranged in priority areas to protect your family 24 hours a day are.
Program the control panel
After installing alarms, concretes just need one last step: programming the control panel, namely the keyboard of this. In this part of the process you will determine the security code of your home, which should be known by all your family and be programmed by the staff of the security company.
In this regard it is important to follow the instructions of the operator’s manual to properly program the entire system operation alarms at home. Then, it is necessary to use the test mode to verify that all sensors are interconnected to the control panel.
The safety of your family is one of the most important aspects, so do not hesitate to install a monitored alarm system.